翻訳と辞書 |
Canadair CT-114 Tutor : ウィキペディア英語版 | Canadair CT-114 Tutor
The Canadair CT-114 Tutor (company model CL-41) was the Royal Canadian Air Force (RCAF), and later Canadian Forces, standard jet trainer, between the early 1960s and 2000. Designed and built by Canadair, it was ordered in September 1961. The Tutor served as the Canadian Forces primary jet trainer until it was replaced by the CT-155 Hawk and CT-156 Harvard II in 2000. The CL-41G model supplied to Malaysia was built as a ground-attack aircraft. The Tutor is currently still used by the Snowbirds aerobatics team. ==Design and development== The CL-41 design was the product of the Canadair Preliminary Design department.〔Dishlevoy 2005, pp. 8-10.〕 The design incorporated a turbojet-powered, low-wing aircraft with a tricycle undercarriage and a T-type tail assembly. The flying controls are manual with spring tabs. The cabin, fitted with a rear-hinged canopy for both crew members, can be pressurized to a differential of 3 psi (20 kPa), the equivalent of about 2,000 m of altitude. It was designed to be a side-by-side trainer for providing elementary jet flight training and other training to an advanced level. The prototype first flew on 13 January 1960. One critical area of design was the positioning of the vertical stabilizer (fin). The CL-41 was intended to demonstrate spin recovery. If the fin is too far forward, a spin cannot be initiated, but if it is too far aft, recovery becomes impossible. Model tests were done to find the optimum position. The original Tutor wind-tunnel model had a cruciform tail, which was revised to the T-tail design by removing the portion above the horizontal stabilizer.
抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)』 ■ウィキペディアで「Canadair CT-114 Tutor」の詳細全文を読む
スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|